Next-Gen High-Power Efficiency Is Here! New 96V/1700W Custom Power Supply Officially Launched

- Built for stability and efficiency, delivering robust power for industrial applications

A new custom switching power supply designed for high-end industrial applications has officially been released. With a rated output power of up to 1700W, this power supply features wide-range AC input, ultra-high efficiency, comprehensive protection, and a compact form factor, providing a rock-solid power foundation for customer equipment. It is an ideal choice for laser equipment, industrial automation, power electronics testing, and more.

1. Powerful 96V Main Output - Robust and Reliable

The new product provides a +96VDC main output with a rated current of 17.7A and rated power of up to 1700W. Output accuracy is controlled within ±1%, with line regulation of ±0.5% and load regulation of ±1%. Even under dramatic load fluctuations, the output voltage remains rock-steady.

In addition, the main output features ripple and noise as low as 600mVp-p, delivering a "clean" power environment for downstream precision circuitry and effectively reducing system malfunctions and noise interference caused by power ripple.

2. Independent 5V Auxiliary Output - Making the System "Smart" and "Standby-Ready"

Unlike ordinary single-output power supplies, the new product features a dedicated +5V/0.2A auxiliary output. This small auxiliary channel serves as the "intelligent hub" of the entire system:

Continuous power for control circuits: Whether the main output is active or on standby, the MCU, monitoring ICs, and other control circuits remain online at all times, allowing the equipment to respond instantly to power-on commands and remote wake-up signals;

Support for protection and monitoring functions: Output sampling, over-voltage and over-temperature detection, status indication, and feedback signals are all powered by the independent auxiliary output - so even if the main output fails, the system can still accurately detect and report the fault;

Independent regulation loop: The auxiliary output has its own feedback regulation circuit, unaffected by load variations on the main output, providing a stable and reliable 5V supply for logic circuits.

It is precisely this auxiliary output that enables true standby control, fault monitoring, and dependable protection at the system level.

3. 93% Efficiency + 0.97 Power Factor - A New Benchmark for Green Energy Savings

The new product supports full-range AC input from 90V to 264VAC, covering major global grid standards, with an input frequency range of 47~63Hz - making worldwide deployment easy.

In terms of efficiency, the product achieves over 93% (at 230Vac) with a power factor of ≥0.97 at 240V, significantly reducing heat generation and energy loss. Combined with a maximum input current capacity of 21.5A and strict inrush current control (cold start: 50A/115VAC, 60A/230Vac), the unit runs cooler, safer, and with a longer service life.

Leakage current is controlled to <0.75mA at 240V, well below safety standard requirements, fully protecting operator safety.

4. Comprehensive Protection - Safeguarding Your Equipment

Industrial environments can be harsh, and the new product is built with a multi-layered protection system:

Whether facing overload, short circuit, over-voltage, or overheating, the unit responds quickly and precisely to maximize the safety of both the power supply and its load.

5. Wide Temperature and Humidity Range - Ready for Harsh Environments

The new product operates across a temperature range of -20°C to +70°C with 10~90% RH humidity (non-condensing), and can be stored from -40°C to +85°C. It has passed 10~500Hz, 2G vibration testing (60 minutes per axis), making it well-suited for outdoor, in-vehicle, and cabinet-mounted applications.

Temperature coefficient is only ±0.3%/°C (0~50°C), ensuring precise output even across wide temperature variations.

6. Authoritative Safety Certifications - Quality You Can Trust

The new product complies with multiple international and national safety standards, including:

UL62368-1 / EN62368-1 / IEC62368-1 / GB4943.1

Withstand voltage: I/P-O/P 3KV, I/P-FG 2.0KV, O/P-FG 1.5KV AC for 1 minute

Insulation resistance: ≥100MΩ at 500VDC

EMC: Compliant with EN55032 CLASS A

Mean time between failures (MTBF) exceeds 50,000 hours (MIL-HDBK-217F, 25°C) - built to military-grade reliability standards for complete peace of mind.

7. Compact Design for Easy Integration

Despite its powerful 1700W output, the unit measures just 255×90×46mm and weighs only 2.0Kg, offering outstanding power density and ample headroom for structural design and space optimization in customer equipment.

Conclusion

From the powerful 96V/1700W main output to the intelligent power management enabled by the independent 5V auxiliary output; from 93% ultra-high efficiency to five-layer protection and authoritative safety certifications - this new custom power supply is a sincere masterpiece combining efficiency, reliability, and intelligence.

For detailed specifications, sample requests, or custom solutions, please contact our sales team. And the email is amy@gzkaihui.com,We are committed to providing you with professional power supply solutions.