Beam Lamp Power Supply

Beam Lamp Power Supply

500W beam lamp power supply, there are three outputs voltage, 385VDC, 28VDC and 12VDC, this is a special SMPS with the special function.
Send Inquiry
Description
Technical Parameters

500W beam lamp power supply, there are three outputs voltage, 385VDC, 28VDC and 12VDC, this is a special SMPS with the special function.


Features:

1, High efficiency 500W 385V 28V 12V switching power supply;

2, Built-in PFC function, low interference 500W 28VDC 12VDC output power supply;

3, 385V 28V 12V power supply with wide range of AC input voltage;

4, Overload, short circuit over voltage and overheating protection;

5, Single output small size beam lamp power supply.


Parameter

Item NO

K18-UP500D2812HV

CH1

CH2

CH3

Output

DC Output Voltage

+28VDC

+12VDC

+385VDC

Rated Current

5A

1A

0.92A

Current Range(natural cooling)

0.1-3A

0.1-1A

0.1-0.78A

Current Range(fan cooling)

0.1-5A

0.1-1A

0.1-0.92A

Ripple & Noise

280mVp-p

150mVp-p

10Vp-p

Rated Power(natural cooling)

400W (CH1 and CH2 total power does not exceed 100W, CH1, CH2, CH3 three-way total power does not exceed 400W)

Rated Power(fan cooling)

500W (CH1 and CH2 total power does not exceed 150W, CH1, CH2, CH3 three-way total power does not exceed 500W)

DC Output ADJ

CH1:±5%

DC Output Tolerance

±1%

±8%

±2%

Line Regulation

±0.5%

±2%

±1%

Load Regulation

±0.5%

±6%

±1%

Set up, Rise, Keep up time

500ms, 50ms, 20ms

Input

Input Voltage Range

100-240V AC

Input Range

3A@220V AC

Input frequency

50-60Hz

Efficiency

>88%

Inrush Current

COLD START 15A/115V, 30A/230V

Leakage Current

<0.35mA 240V AC

Power Factor

>0.99@110V;>0.95@220V

Protection

Over Load Protection

110~200%, Hiccup, automatic recovery, 385V does not allow overload

Over Voltage Protection

--

Over Temp., Protection

Housing (Q1 position) temperature is greater than 105 °, the output is off, automatic recovery

Environment

Working Temp., Humidity

-20~50℃, 10~90% RH, No condensation

Storage Temp., Humidity

-20~85℃, 10~95% RH

Temp., Drift

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES

Safety & EMC Standard

Safety standards

GB4943, EN60950-1

Withstand Voltage

I/P-O/P:1.8KVAC I/P-FG:1.8KVAC O/P-FG:600VAC

Insulation resistance

IP-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms

EMC standards

---

Others

Dimension

127*82*40mm(L*W*H)

Weight

0.6KG

Notes

1. All the parameters in the 230VAC input, rated load, temperature 25 ℃, humidity 70% under the conditions of determination;
2. Accuracy: including setting error, line adjustment rate, load regulation rate;
3. Ripple test: connect the power supply and load with 30cm long wire and 0.1u and 47u capacitance at the load end, measured on the load side with 20MHz oscilloscope;
4. Line regulation: at rated load conditions, the input voltage changes from low to high measured;
5. Load regulation: the measured output load from 0 to 100% load change measured.


500w power supply

 

Hot Tags: beam lamp power supply, China, manufacturers, suppliers, factory, customized, buy, made in China, 12V 8A Power Supply Open, leaser lights open frame psu, air purifiere switching power supply, 1000w 24v Power Supply CE, 1500w Power Supply 48V, moving head lights switching power supply

Send Inquiry